HP LaserJet Enterprise M406

HP’s entry-level Enterprise-class printer. Black-and-white office LaserJet printer with high-quality results, extra power, and more features. This printer uses dynamic security, which may be updated periodically by firmware updates. Resolution: Up to 1,200 x 1,200 dpi. Recommended monthly page volume: 900 to 4800 pages.

Check HP LaserJet Enterprise M406 price here!

HP LaserJet Enterprise M406 Replacement cartridges

  • HP 58A Black Original LaserJet Toner Cartridge (~3,000 pages) CF258A
  • HP 58X High Yield Black Original LaserJet Toner Cartridge (~10,000 pages) CF258X


Check prices here!

How to change the toner cartridge HP LaserJet Enterprise M406 printer

Replace the toner cartridge if you receive a message on the printer.

  1. Press the front door release button.
  2. Open the front door.
  3. Remove the used toner cartridge from the printer.
  4. Remove the new toner cartridge package from the box, and then pull the release tab on the packaging.
  5. Remove the toner cartridge from the opened packaging shell. Place the used toner cartridge in the shell for recycling.
  6. Holding the toner cartridge on both ends, gently rock the cartridge end to end to distribute the toner evenly inside the cartridge.
  7. Align the toner cartridge with the tracks inside the printer, and install the toner cartridge until it is firmly seated.
  8. Close the front door.

HP LaserJet Enterprise M406 Firmware

How to perform firmware upgrades.

Embedded Web Server:
After uncompressing the file you will see a xxxxxxx.bdl file.
  1. Open an Internet Browser Window.
  2. Enter the IP address in the URL line.
  3. Select the Firmware Upgrade link from within the General tab.
  4. Select Choose File and browse to the location that the firmware upgrade file was downloaded to, and then select the firmware file.
  5. Select the Install button to perform the upgrade.

via USB drive:
After uncompressing the file you will see a xxxxxxx.bdl file.
  1. Copy the xxxxxxx.bdl file to a portable USB flash memory storage device
  2. Turn the printer ON.
  3. Swipe to the left and select the Support Tools application.
  4. Select the Maintenance menu
  5. Select the USB Firmware Upgrade menu.
  6. Insert the portable USB storage device with the xxxxxxx.bdl file on it into the USB port on the front control panel of the product.
  7. Select the xxxxxxx.bdl file you would like to use.
  8. Select the Install button on the bottom of the screen.
  9. Select the Upgrade, Re-install or Downgrade option depending on the task you are performing. The firmware upload process will begin.

When the upload is complete, the printer will reboot automatically and start the upgrade process.

Download HP LaserJet Enterprise M406 Firmware

Link: www.hp.com/support/ljM406